SC-FS-EZ-x Passerelle Fieldserver EZ - Modbus / BACnet / M-Bus / KNX
La passerelle Fieldserver EZ est un produit simple à configurer pour interfacer les périphériques M-Bus, Modbus, BACnet ou KNX dans les applications tertiaires ou industrielles. Les intégrateurs n’ont plus besoin d’être des experts en protocoles de communication et réduisent considérablement le temps de mise en service. Les protocoles MS/TP, IP, RTU et TCP/IP sont supportés par toutes les passerelles. Les prix publiques de cette gamme sont nets (les remises ne sont pas applicable). Pour toutes demandes de prix merci de nous contacter à service.client@sontay.fr.
- PRICES ARE AVAILABLE UPON REQUEST - Contact sales@sontay.com
- KNX: The EZ Gateways KNX interface is compatible with all KNX certified products. Easy data mapping via built in KNX data map graphical user interface and import of XML and ESF files.
- NOTE: The prices for these products are net prices. Account discounts do not apply.
- Modbus: Supports virtual nodes allowing each Modbus device connected to a single EZ Gateway to be seen as a separate device on the BACnet network. The webinterface is used to configure the local network settings and create profiles for Modbus devices.
- M-Bus: M-Bus Explorer and Device Profiles App allow each M-Bus device to be auto-discovered, templatised and presented to quickly configure new M-Bus devices. This makes each corresponding M-Bus device into a virtual BACnet device within the EZ Gateway, thereby providing granular visibility and control over each device via BACnet.
Prices shown are net and any company discount is already applied.
Veuillez vous connecter au portail client pour créer et soumettre des devis et consulter les détails de votre compte. Si vous n'avez pas encore de compte, vous pouvez vous inscrire ici
Sontay Limited
Four Elms Road
Edenbridge
Kent TN8 6AB
UK
Tel: +44(0)1732 861200
Email: Sales@sontay.com
Website: www.Sontay.com
CE CERTIFICATE OF CONFORMITY
As detailed under the following:
The Electromagnetic Compatibility Directive (EMC) 2014/30/EU & UK Legislation EMC Regulations SI2006/3418
The Low Voltage Directive (LVD) 2014/35/EU & UK Legislation The Electrical Equipment (Safety) regulations 1994 (SI1991/3260)
The Declaration of Conformity is provided for the following equipment:
Equipment:
Manufacturer:
Sontay Ltd
Four Elms Road
Edenbridge
Kent, TN8 6AB
Harmonised Standards:
BS EN 61000-6-1:2007 Electromagnetic compatibility (EMC)
Generic standards: Immunity for residental, commercial and ligh-industrial environments.
BS EN 61000-6-1:2007 + A1:2011 Electromagnetic compatibility (EMC)
Generic standards: Emission standard for residental, commercial and ligh-industrial environments.
Declaration:
Sontay Ltd. Declare that the product listed above conform, when installed and operated in accordance with the current relevant installation and operational standards and practices together with and additional information contained in the data sheet and/or manual to the above standards.
Sontay Ltd. Declare that the product listed above are deemed to fall outside the scope of both Council Directive Electromagnetic Compatibility Regulations 2016 relating to electromagnetic compatibility & Council Directive Electrical Equipment (Saftey) Regulations 2016 the Low Voltage Directive.
Signed:
(Authorised Signatory)
Stacey Lucas
Commercial Director
Registered in England No.04897542 Registered Office: Four Elms Road, Edenbridge, Kent TN8 6AB
Sontay Limited
Four Elms Road
Edenbridge
Kent TN8 6AB
UK
Tel: +44(0)1732 861200
Email: Sales@sontay.com
Website: www.Sontay.com
UKCA CERTIFICATE OF CONFORMITY
As detailed under the following:
Electromagnetic Compatibility Regulations 2016 (EMC)
Electrical Equipment (Saftey) Regulations 2016 (LVD)
The Declaration of Conformity is provided for the following equipment:
Equipment:
Manufacturer:
Sontay Ltd
Four Elms Road
Edenbridge
Kent, TN8 6AB
Harmonised Standards:
BS EN 61000-6-1:2007 Electromagnetic compatibility (EMC)
Generic standards: Immunity for residental, commercial and ligh-industrial environments.
BS EN 61000-6-1:2007 + A1:2011 Electromagnetic compatibility (EMC)
Generic standards: Emission standard for residental, commercial and ligh-industrial environments.
Declaration:
Sontay Ltd. Declare that the product listed above conform, when installed and operated in accordance with the current relevant installation and operational standards and practices together with and additional information contained in the data sheet and/or manual to the above standards.
Sontay Ltd. Declare that the product listed above are deemed to fall outside the scope of both Council Directive Electromagnetic Compatibility Regulations 2016 relating to electromagnetic compatibility & Council Directive Electrical Equipment (Saftey) Regulations 2016 the Low Voltage Directive.
Signed:
(Authorised Signatory)
Stacey Lucas
Commercial Director
Registered in England No.04897542 Registered Office: Four Elms Road, Edenbridge, Kent TN8 6AB
Sontay Limited
Four Elms Road
Edenbridge
Kent TN8 6AB
UK
Tel: +44(0)1732 861200
Email: Sales@sontay.com
Website: www.Sontay.com
CERTIFICATE OF ORIGIN
Sontay Limited confirm the Contry of Origin is as shown against each item.
| Part Code | Description | Origin | HS Code |
|---|---|---|---|
Signed on behalf of Sontay Limited by:
(Authorised Signatory)
Stacey Lucas
Commercial Director
Registered in England No.04897542 Registered Office: Four Elms Road, Edenbridge, Kent TN8 6AB